Fluid-applied, modified polyurethane waterproofing membranes for vertical and horizontal applications.

TREMproof 201/60 - TREMproof® 201/60 is a high-solids, VOC compliant, modified polyurethane waterproofing membrane.

TREMproof 250GC - TREMproof® 250GC is a rapid-curing, high-solids, VOC-compliant modified polyurethane waterproofing membrane that can be applied to damp and green concrete.

TREMproof 260 - TREMproof® 260 Waterproofing Membrane is a polymer-enhanced, single-component, fluid-applied, asphalt emulsion, below-grade waterproofing membrane.

TREMproof PUMA - TREMproof® PUMA is a cold-applied, waterproofing system that utilizes polyurethane-methacrylate (PUMA) technology.

One-part, 100% solids, hot rubberized asphalt waterproofing membrane for vertical and horizontal application.

Permaphalt Waterproofing System - Permaphalt™ Waterproofing System is an economical traffic-bearing system designed to provide long-term performance of the waterproofing membrane and a heavy-duty, skid-resistant driving surface.

TREMproof 6100 - TREMproof 6100® is a one-part, 100% solids, hot-applied, rubberized asphalt waterproofing membrane.

TREMproof 6100BM - TREMproof® 6100BM is a hot-applied rubberized asphalt waterproofing membrane.

TREMproof 6145 - TREMproof® 6145 is a hot-applied rubberized asphalt membrane for use in waterproofing underneath traffic-bearing asphalt and concrete overlays.

Self-Adhered Membranes

TREMproof 500 Series (TREMproof 545/560) - TREMproof® 500 Series incorporates a double-scrim HDPE membrane with a special-weave pattern that enhances abrasion resistance, thickness, flatness and tear properties.

Paraseal - Paraseal® is a sheet waterproofing membrane consisting of 15 mils of HDPE and expandable, granular bentonite.

Paraseal GM - Paraseal® GM is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite.

Paraseal GM/LG 20 Mil - Paraseal® GM/LG – 20 mil is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester.

Paraseal GM/LG 60 Mil - Paraseal® GM/LG – 60 mil is a sheet waterproofing and methane-mitigating membrane consisting of 60 mils of HDPE, expandable granular bentonite and a protective layer of spun-bonded polyester.

Paraseal LG - Paraseal® LG is a sheet waterproofing membrane consisting of 20 mils of HDPE, expandable, granular bentonite and a protective layer of spun-bonded polyester.

TREMproof Dual Waterproofing System (DWS) - TREMproof® Dual Waterproofing System (DWS) is a dual membrane waterproofing system comprised of TREMproof TRA sheeting embedded into TREMproof 250GC.

TREMproof Triple Waterproofing System (TWS) - TREMproof® Triple Waterproofing System (TWS) is a blindside and underslab triple-layer waterpoofing assembly consisting of 20 mils of HDPE, expandable granular bentonite and a protective layer of spun-bonded polyester, coated with 60 dry mils of polymer-enhanced, liquid-applied asphalt membrane.

The TREMDrain Series consists of prefabricated drainage mats for vertical and horizontal applications with a variety of combinations of filter fabrics, drainage cores and protective polymeric film and a Total-Drain System to replace perforated pipe/aggregate collection systems.

TREMDrain - TREMDrain is a two-layer drainage mat consisting of a polystyrene core and nonwoven, needle-punched polypropylene fabric.

TREMDrain 1000 - TREMDrain 1000 consists of a polystyrene core and nonwoven, needle-punched, polypropylene fabric.

TREMDrain 2000 - TREMDrain 2000 is a three-layer drainage mat including a woven polypropylene fabric, polystyrene core and polymeric film.

TREMDrain 3000 - TREMDrain 3000 is a two-part prefabricated drainage material and protection board consisting of a formed polystyrene core covered on one side with a woven polypropylene filter fabric.

TREMDrain 6000 - TREMDrain 6000 is a multi-composite prefabricated drainage material and protection board consisting of a formed polypropylene core covered on one side with a high strength, spun-bonded polypropylene filter fabric.

TREMDrain 6600 - TREMDrain® 6600 is a multi-composite prefabricated drainage material and protection board consisting of a formed polypropylene core covered on one side with a high strength, nonwoven needle-punched polypropylene filter fabric that is heat bonded to the core.

TREMDrain DPI - TREMDrain DPI is an optional drainage, protection and insulation board designed for use primarily with TREMproof® 260 Spray-Applied Waterproofing Membrane.

TREMDrain Fittings and Accessories - TREMDrain Fittings & Accessories include Corner Guard, Universal Outlet, and Universal Tee.

TREMDrain GS - TREMDrain GS drainage mats consist of a perforated polystyrene core, with fabrics attached to both sides.

TREMDrain QSP - TREMDrain QSP (Quick Set Panel) is a three-part prefabricated drainage panel and protection board consisting of a formed perforated polystyrene core covered on dimple side with a nonwoven, needle-punched polypropylene filter fabric along with a breathable crosshatched fabric on the backside.

TREMDrain S - TREMDrain S offers the highest compressive strength available within the TREMDrain Series and consists of a nonwoven, needle-punched, polypropylene fabric, polystyrene core and polymeric film backing.

TREMDrain Total Drain - TREMDrain Total Drain is a two-layer drainage mat with a unique polystyrene core that consists of a high-profile drainage section for water collection and flow around the structure and a transition section to connect to other TREMDrain series drainage mats.

Paraseal Paraprimer - Paraseal® Paraprimer™ is an adhesive primer formulated to prepare construction surfaces prior to application of Parastick ‘n’ Dry, Superstop and various tapes.

Tremco Epoxy Primer - Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes.

TREMprime LV Primer - TREMprime LV Primer is a solvent-based modified bituminous primer for use in preparing porous and non-porous surfaces for application of Tremco hot-applied asphaltic fluids.

TREMprime Non-Porous Primer - TREMprime Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.

TREMprime QD Low-Odor Primer - TREMprime QD Low-Odor Primer is a quick drying, high-solids, modified bituminous roofing primer used with TREMproof® 6100 waterproofing membrane.

TREMprime WB Primer - TREMprime WB Primer is a high-solids, water-based primer for use in preparing porous and non-porous surfaces for application of TREMproof 6100, 6100BM and 6145.

Protection Courses designed to absorb the impact of aggregate shock, normal jobsite foot traffic and to protect the membrane waterproofing from penetration by sharp aggregate during backfilling, slab pouring and later settlement.

Elastomeric Sheeting - Elastomeric Sheeting is classified as a thermoset material made of highest quality uncured neoprene rubber at a thickness of 60 mils (1.52mm).

HDPE Protection/Barrier Courses - A series of high-density polyethylene sheets designed for membrane protection, as well as various barrier applications.

POWERply Standard Smooth - POWERply® Standard Smooth is a smooth surfaced, modified bitumen sheet used in conjunction with recommended waterproofing membranes as an extremely heavy-duty protection course, primarily in horizontal applications.

POWERply Standard White Granular - POWERply® Standard White Granular is a rough surfaced, modified bitumen sheet used in conjunction with recommended waterproofing membranes as an extremely heavy-duty protection course, primarily in horizontal applications.

Tremco 2011 - Tremco® 2011 is an open-weave fabric consisting of glass fiber yarn saturated with synthetic resins.

Tremco 2178 - Tremco® 2178 Glass Ply Sheet is an asphalt-impregnated fiberglass ply felt marked with laying lines and lightly dusted on one side with a fine mineral parting agent.

Tremco 2190 - Tremco® 2190 consists of a single ply of felt fully saturated and coated on both sides with premium asphalt and durable, interlocking cellulose fibers.

Tremco 2450 - Tremco® 2450 Protection Board is an extruded, hollow-core polypropylene/polyethylene copolymer.

Tremco 2550/2560 - Tremco® 2550 and 2560 Protection Boards are semi-flexible asphaltic sheets.

Tremco Protection Mat - An ultra lightweight, extremely tough 14-oz protection mat for waterproofing membranes in both vertical and horizontal applications.

Tremco Retention Squares - Tremco Retention Squares are high-density polyethylene reservoir boards designed for use in GreenScape and amenity deck applications.

Elastomeric Sheeting - Elastomeric Sheeting is classified as a thermoset material made of highest quality uncured neoprene rubber at a thickness of 60 mils (1.52mm).

Flashing System (PUMA) - TREMproof® PUMA Flashing System is a quick-cure, liquid-applied system based on PUMA technology.

Reinforcing Fabrics - Spun-bonded polyester fabric consisting of a nonwoven fabric of continuous filament polyester fibers that are randomly arranged.

Tremco 2011 - Tremco® 2011 is an open-weave fabric consisting of glass fiber yarn saturated with synthetic resins.

Tremco 2178 - Tremco® 2178 Glass Ply Sheet is an asphalt-impregnated fiberglass ply felt marked with laying lines and lightly dusted on one side with a fine mineral parting agent.

Tremco DualFlex - Tremco DualFlex® is a reinforcing flashing that consists of a central strip of elastomeric SEBS rubber flanked on either side by an absorbent non-woven felt.

A multi-composite waterstop with the self-sealing ability of bentonite used to seal cold joints in concrete.

Superstop - Superstop is a composite waterstop containing expandable, granular bentonite.

Dymonic 100 - Dymonic® 100 is a high performance, medium-modulus, low-VOC, UV stable, non-sag polyurethane sealant.

Paraseal Para JT - Paraseal® Para JT™ is an adhesive joint tape compound formulated with cross-linked polymeric elastomers.

Paraseal Paraboot - Paraseal® Paraboots are a series of 60-mil, high-density polyethylene prefabrricated covers.

Paraseal Paragranular - Paraseal® Paragranular™ is a premium, Wyoming-type, high swelling, granular, sodium bentonite.

Paraseal Paramastic - Paraseal® Paramastic™ an expandable mastic for use with Paraseal waterproofing membrane.

Paraseal Parastick 'n' Dry - Paraseal® Parastick ‘n’ Dry™ is a laminate of bentonite applied to mesh with a pressure sensitive adhesive on one side.

Paraseal Paraterm Bar - Paraseal® Paraterm™ Bar is an aluminum alloy especially formulated to exhibit excellent holding power.

Paraseal Permanent Seam Tape - Paraseal® Permanent Seam Tape™ is a rubberized asphalt membrane laminated to a polyethylene reinforcing film.

TREMproof TRA Sheeting - TREMproof® TRA Sheeting is a protective waterproofing course that is compounded from a blend of EPDM and SBR thermostat elastomers.

Vulkem 191 Primer - Vulkem® 191 Primer is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat.

Permaquik Crystalline Waterproofing - Permaquik® 200 Crystalline Waterproofing is a capillary waterproofing formulation of proprietary blends of chemicals, quartz sand and cement.